Change The Recorded Location Name Information - Panasonic Lumix DMC-TS4 Owner's Manual

Change the recorded location name information

When the information acquired by the positioning is different from the current location, it is
possible to change it by selecting the desired location name or landmark from the
selectable candidates registered in the database of this unit.
• Other location name information can be selected when [
name information.
Select [GPS Area Select] on the [GPS/Sensor] menu, and then press
[MENU/SET].
Press 3/4 to select the item to change, and then press [MENU/SET].
Press 3/4 to select the location name or landmark from the
candidates, and then press [MENU/SET].
∫ When not storing the location name or the landmark in the recorded pictures
When not storing all the location name information:
Select [Delete all place-names] in above step
–
Confirmation screen is displayed. All the displayed location name information is deleted and
the information will not be stored from the next time a picture is recorded when [Yes] is
selected.
When not storing specific location name information:
Select [Delete country], etc., in above step
–
Confirmation screen is displayed. All the items inferior to the deleted item are deleted and the
information will not be stored from the next time a picture is recorded when [Yes] is selected.
(Example: When the [State/Prov./County] is deleted, [County/Township], [City/Town/Village]
and [Landmark] that are inferior to it are also deleted.)
Note
•
To restore the location name information deleted, set them again.
•
When desired location name or landmark is not displayed among the candidates, perform
[My Landmark] (P120)
a picture.
•
Latitude/longitude is not deleted even when the location name or landmark is deleted. Turn
[GPS Setting] to [OFF] if you would not like to store the latitude/longitude.
GPS/Sensor
before taking a picture, or perform [Place-Name Edit]
- 119 -
] is displayed with the location
2
3
(P142) after taking