Changing The Clock Setting (In Normal Picture Mode) - Panasonic DMC-FX35 Operating Instructions Manual

Changing the clock setting (In normal picture mode)

1
Press [MENU/SET].
2
Press 3/4 to select [CLOCK SET].
3
Press 1 and then perform steps
4
Press [MENU/SET] to close the menu.
•
You can also set the clock in the [SETUP] menu.
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
•
When a fully charged battery has been inserted for more than 24 hours, charging of the built-in
battery for the clock is completed so the clock setting will be stored (in the camera) for at least
3 months even if the battery is removed. (If you insert a battery that is not sufficiently charged,
the length of time that the clock setting is stored may become less.)
•
You can set the year from 2000 to 2099. The 24-hour system is used.
•
If the clock is not set, the correct date cannot be printed when you stamp the date on the
pictures with [TEXT STAMP]
•
If the clock is set, the correct date can be printed even if the date is not displayed on the screen
of the camera.
Preparation
3 4
and
(P107) or order a photo studio to print the pictures.
- 22 -
to set the clock.
(P27)