Table of Contents
Advertisement
Press 2/1 to select the items (year,
month, day, hour, minute, display
sequence or time display format), and
press 3/4 to set.
A: Time at the home area
B: Time at the travel destination
•
Select either [24HRS] or [AM/PM] for the time display
format.
•
When [AM/PM] is selected as the time display format,
midnight is displayed as AM 12:00 and noon is displayed as PM 12:00. This display
format is common in the US and elsewhere.
•
You can cancel without setting the clock by pressing [‚].
Press [MENU/SET] to set.
Press [MENU/SET].
•
Press [
] to return to the settings screen.
‚
•
After completing the clock settings, turn the camera off. Then turn the camera back on,
and check that the display reflects the settings that were performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1.
•
It can be changed in steps
•
The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
•
You can set the year from 2000 to 2099.
•
If the clock is not set, the correct date cannot be printed when you stamp the date on the
pictures with [TEXT STAMP]
•
If the clock is set, the correct date can be printed even if the date is not displayed on the screen
of the camera.
Preparation
(P122)
Changing the clock setting
5
6
and
to set the clock.
(P157)
or order a photo studio to print the pictures.
- 25 -
:
:
"
Changing the clock setting
(P27)
"
procedure
Advertisement
Table of Contents
