Others[2/2] Menu Screen - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

Hd camera recorder
Hide thumbs Also See for GY-HD250U - 3-ccd Prohd Camcorder:
Table of Contents

Advertisement

e_hd250.book Page 97 Tuesday, October 24, 2006 3:11 PM

OTHERS[2/2] Menu Screen

* This is not displayed in VTR mode.
Item
1394 REC TRIGGER*
Sets how to control the REC trigger command output from the IEEE1394 connector. (Can be displayed and set in
camera mode)
Set this when recording a backup of the HDV/DV signal from GY-HD250/GY-HD251 onto another device.
OFF
SYNCRO : Controls the backup device in conjunction with the recording start/stop mode status on this device, and
SPLIT
SERIES : Automatically starts recording on a backup device that is on Pause when the tape on this device has less
MEMO
• If you use the backup recording function on the BR-HD50, set this item to OFF.
• The cursor (K) does not move to this item when this device is recording.
BACK SPACE [HDV]*
This function controls the camera tape transport, back space and pre-roll time when the camera is connected to an
external HDD or external back up Recorder via IEEE1394 in HDV mode.
P-1394
P-TAPE : Priority for camera VCR recording
BACK SPACE [HDV]
Note 1:
REC start signal will be sent 3 seconds after pressing REC trigger button.
* Actual recording start time is depending on recorder performance.
Note 2:
REC start signal will be sent just after pressing REC trigger button.
* Actual recording start time is depending on recorder performance.
Note 3:
In this mode, the IEEE1394 stream is discontinuous during internal VCR back space editing (when the REC trigger
is operated). This may result in breaks in the recording on tape on an external recorder. In the case of HDD recording
this may result in this device staying in REC PAUSE or divided files.
Note 4:
If HD/SD SDI OUT on the VIDEO FORMAT[2/2] menu screen is set to ON, the internal VCR start delay becomes
approximately 3 seconds.
Function/Setting (bold characters indicate initial settings)
: Does not control the backup device.
if there is no videocassette or if no tape remains for recording, controls the backup device in conjunction
with the REC trigger button and the lens VTR button on this device.
: The REC trigger button on the right panel of this device controls the backup device recording start/stop.
Set this when you want to control the timing of the recording on this device and the backup device sep-
arately.
than 3 minutes remaining during shooting.
: Priority for IEEE1394 recording (Auto setting)
IEEE1394
connection
Connected and
Power ON
P-1394
No connection or
Power OFF
See Note 4
Connected and
Power ON
P-TAPE
No connection or
Power OFF
1394 REC
Internal
TRIGGER
VCR
(X See page 97)
start delay
OFF
SYNCRO
approx. 3 seconds
SPLIT
SERIES
OFF
SYNCRO
approx. 1 second
SPLIT
SERIES
OFF
SYNCRO
approx. 1 second
SPLIT
SERIES
OFF
SYNCRO
approx. 1 second
SPLIT
SERIES
External Recorder or HDD
vie IEEE1394 terminal
N/A
See Note 1
See Note 2
N/A
N/A
See Note 3
N/A
N/A
97

Advertisement

Table of Contents
loading

Table of Contents