Connect A Remote Control Unit (Rm-Lp55/Rm-Lp57) - JVC GY-HD250U - 3-ccd Prohd Camcorder Instructions Manual

e_hd250.book Page 71 Tuesday, October 24, 2006 3:11 PM
Connect a Remote Con-
trol Unit (RM-LP55/RM-
LP57)
Set camera switch functions with the remote control unit
(RM-LP55/RM-LP57).
Connection
Connect the remote control unit cable to the REMOTE termi-
nal.
RM-LP55
CAUTION
Turn the power OFF when connecting.
Operation
1.
Turn the device ON.
2.
Turn ON the OPERATE switch on remote control unit to
activate the remote control unit.
See page 72 for details on functions that can be operated
with the remote control unit.
Notes on Using the Remote Control Unit
• When the switch function of this device and the remote
control unit are the same, the remote control switch func-
tion is prioritized.
• FOCUS and ZOOM cannot be adjusted with the remote
control unit.
• Shutter speed slightly differs from the value displayed on
this device.
• Shutter Speed in 24p Mode
When this device is in 24p mode, shutter speed cannot be
set to 1/60 (U model) or 1/50 (E model) with the remote
control unit.
Even if shutter speed is set to 1/60 or 1/50 with the remote
control unit when in 24p mode, the shutter speed for the
device is 1/48.
• When H PHASE adjustment is performed with the remote
control unit, only H PHASE of SD signal operates.
• When adjusting H PHASE of SD signal with the remote
control unit, it cannot be set outside the range of SD H
PHASE in the GENLOCK menu screen. X See page 99.
• AUTO WHITE Function
When the device is in VTR mode, AUX IN mode or during
playback or HEADER REC, the AUTO WHITE function
does not work even if the auto white operation is per-
formed with the RM-LP55 and RM-LP57.
In the case of the RM-LP55, "LOW LIGHT ERROR" is dis-
REMOTE
played on the LCD screen of the RM-LP55.
71