Tcp/Ip - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

6. The NetBEUI Machine Name field displays the NetBEUI Machine Name for the printer.
This is a read-only field.

TCP/IP

Navigation: PRINTER DEFAULTS > NETWORK > TCP/IP
You can use this page to view and change the TCP/IP communication parameters of the
printer's AccXES Controller. To change settings, you will have to enter the printer password
from the Session Setup link on the Main Menu.
TCP/IP parameters on the WIDE FORMAT PRINT SYSTEMS 8830 /8825 /8850 /510DP are
read-only through the Web PMT and thus, can only be modified at the printer control panel.
On the WIDE FORMAT PRINT SYSTEMS 8855 and 721P, the TCP/IP parameters can be
modified by users with printer password.
However, incorrect specification of the TCP/IP parameters can result in the Web PMT
losing all communication with the printer.
1. DHCP enable - When this box is checked (enabled), the network interface utilizes the
Dynamic Host Configuration Protocol to acquire a temporary IP Address for the
networked device from a client that is supplying DHCP services on the network. As
constantly changing (temporary) IP addressing can cause problems for users in network
communications, the default value for this feature is "not checked" (disabled).
WARNING - If this box is checked and there is no DHCP server on the network, the
Web PMT will be completely unusable. For the WIDE FORMAT PRINT SYSTEM
8825, 8830, 8850, and 510DP you can use the Printer Control Panel to undo this
setting. For the WIDE FORMAT PRINT SYSTEM 8855 and 721P, you will need to
upload a recovery file to the AccXES Controller through the serial or parallel port.
2. RARP/BOOTP enable - When this box is checked (enabled), the network interface
utilizes the RARP and BOOTP protocols to acquire an IP Address from the appropriate
server. Since the AccXES Controller should have been assigned a fixed IP Address by
the Systems Administrator, it should not be necessary for the Controller to have to query
the network to discover its IP Address. The default setting for this feature, therefore, is
"not checked" (disabled).
WARNING - If this box is checked and there is no RARP server on the network, the
Web PMT will be completely unusable. For the WIDE FORMAT PRINT SYSTEM,
8830, 8850 and 510DP, you can use the Printer Control Panel to undo this setting.
For the WIDE FORMAT PRINT SYSTEMS 8855 and 721P, you will need to upload a
recovery file to the AccXES Controller through the serial or parallel port.
3. Netmask - These fields contain the value that the printer will use for its IP sub-net mask.
The format is the same as the Ethernet TCP/IP Address.
Web Print Manager Tool User Guide Page 29