Processing Defaults Menus; Finishing Page - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

Processing Defaults Menus

Finishing Page

This description applies to the Xerox WIDE FORMAT 8830 folder.
Navigation: PRINTER DEFAULTS > PROCESSING DEFAULTS > Finishing
Folder Type - This read-only field displays the type of folder currently connected to the
printer. The Web PMT automatically detects the type of folder installed on the printer.
If you entered the printer password in the Session Setup, you can change the following
printer defaults for finishing:
1. Folding Options - Click on this list box to select the printer default folding operation.
The list box will display all the folding options. You must select a va lid folding option for
your folder type (the default is NO FOLD).
2. Press the Update Printer button to update the specified parameter changes in the
printer.
This description applies to any GFI folder.
Navigation: PRINTER DEFAULTS > PROCESSING DEFAULTS > Finishing
Finisher Version - This read-only field displays the version of the folder currently connected
to the printer.
Finisher Model - This read-only field displays the model of the folder currently connected to
the printer.
If you entered the printer password in the Session Setup, you can change the following
printer defaults for finishing:
1. Programs - Click on this drop box to select from a list of the available finisher
programs. Directly below the Programs list is a more detailed description of the
currently selected program. Please note that the program description will not change
on the WebPMT page until the Update Printer button has been pressed.
2. Tabs - Click on this drop box to select from a list of the available tab override settings.
Available options are Always On, Always Off, USE PROGRAM SETTING. Default is
USE PROGRAM SETTING
3. Punch - Click on this drop box to select from a list of the available punch override
settings. Available options are Always On, Always Off, USE PROGRAM SETTING.
Default is USE PROGRAM SETTING
4. Margins - Click on this drop box to select from a list of the available margin override
settings. Available options are Always Off, USE PROGRAM SETTING. Default is USE
PROGRAM SETTING
Page 44
Web Print Manager Tool User Guide