Xerox 850DP - Phaser Color Solid Ink Printer User Manual page 34

Ÿ To upload a pen palette file to the selected Pen Palette, press the Load Palette
button (this button is displayed only for palettes 1 through 8) and the Load Palette
File page will display. On the Load Palette File page, enter the full file path name of
the desired pen palette file in the indicated text box. To help select a file, press the
Browse... button to display the standard file dialog. Once you have selected a valid
pen palette file, press the Update Printer button. A message page will display
stating the success or failure of the request. To return to the Pen Palettes page,
click on the BACK TO Palette link on the message page.
3. To change the attributes of a pen for the currently selected palette (for a palette in the
range 1 through 8), click the desired pen number (the hypertext link in the first column
of the Pen Palette table) to display the Pen Attributes page. This page is used to
change the attributes of the selected pen. If you entered the printer password, you can
use this page to change and copy to other pens the attributes of the selected pen. The
Pen Attributes table lists four attributes b y name (hypertext link), Current value and
New value (the New value will be updated as you make your changes).
Ÿ Click on the desired attribute name to link to the Change Pen attribute page for that
attribute (e.g., click on Width to display the Change Pen Width page).
Ÿ If you selected Width , enter the desired width in the corresponding text field
and click on the mm or in. radio button to select the units.
Ÿ If you selected Pattern, click on the radio button next to the desired pen
pattern.
Ÿ If you selected Color, click on the radio button next to the desired pen color or
enter the red, green, blue color values (RGB color code) in the corresponding
text fields at the top of the color table. The range of values for red, green, and
blue is 0 to 255.
NOTE: If your printer does not support color, the RGB value is converted to a
gray scale value.
Ÿ If you selected Override, click on the desired override check boxes.
Ÿ Press the OK button (on the Change page). The Pen Attributes page will display
and the changed pen attribute will update the previous value shown under the New
column heading.
Ÿ Repeat steps 1 and 2 for any other pen attribute you wish to change. After you
have completed the changes to the pen attributes, proceed to the Pen Copy
options below.
Ÿ On the Pen Attributes page, select the pen attributes that you wish to copy to one
or more other pens in this palette. On the Pen Copy line, click on any of the
following check boxes: Width , Pattern, Color and Override.
Ÿ In the Copy to pen(s) text box, enter the pen number or numbers.
Ÿ Press the Update Printer button to change the pen attributes to the settings shown
in the New column of the Pen Attributes table for the selected pen and any copied
to pens. This only changes the currently selected palette in the printer.
4. Click on the BACK TO Palette link to return to the Pen Palettes page.
Page 34
Web Print Manager Tool User Guide