Media Mismatch Mode; Media Color Settings (Only For Color Inkjet Printers) - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

on the WIDE FORMAT PRINT SYSTEM 8855 is 1600.2 cm or 630 inches. The
maximum length on the WIDE FORMAT PRINT SYSTEM 721P is 2400 cm or 945
inches.
10. Mismatch Queue - Click on this check box to enable/disable mismatch queuing.
When a media mismatch occurs, and this box is not checked, the Status column of the
Job Queue List will display Mismatch/Blocked, and printing will pause until the
necessary medium is installed or the job is cancelled. When a media mismatch occurs,
and this box is checked, the Status column of the Job Queue list will display
Mismatch/Queued. In this case, pages requiring the missing medium are not printed,
but pages requiring media which are currently installed will be printed.
11. Press the Update Printer button to update the default media parameters in the printer.

Media Mismatch Mode

1. Select PRINTER DEFAULTS > PROCESSING DEFAULTS > Media to display the
Media page.
2. Click on the Media Specific Settings list box to select a media type.
3. Press the Adjust Settings (Text Form), or Adjust Settings (Graphical UI) button to
go to the Media Specific Settings page.
4. Media Mismatch Mode - Select the QUERY mode if you want the printer to prompt
the operator at the printer control panel to install the appropriate media size. For
monochrome printers, select the SUBSTITUTE mode if you want the printer to make
media type substitutions as necessary to print the page. Select the SCALING mode if
you want the printer to automatically scale to the nearest available media size of the
same media type.
5. Press the Update Printer button.

Media Color Settings (only for color inkjet printers)

Media Color Settings can be adjusted for you to get your expected printed color.
Ink Limit is used to change the maximum amount of ink used in printing. Valid values for
Ink Limit are 1% to 100%.
Gamma is used to adjust the entire color curve without moving the endpoints of the curve.
This adjusts the mid tones (higher gamma produces darker mid tones), with minimal effect
on shadows and highlights. Valid values for Output Gamma are 0.5 to 2.2.
1. On the Media Page, select the media type in the Media Specific Settings section.
If you have a Java plug-in installed
(http://java.sun.com/products/archive/j2se/1.4.0/index.html), or if you have permissions to
install it for your browser, then select the Adjust Settings (Graphical UI) button. If not,
press the Adjust Settings (Text Form) button. If you did not have the Java plug-in
installed and you selected the Graphical UI, then it will attempt to install itself (it gets
downloaded from the Sun web site, so you will need internet access for this). You should
follow the instructions on-screen in order to install the plug-in.
2. If you are on the Media Specific Settings Graphical UI page, do the following. If you are
on the Text Form page, go to the next section.
Web Print Manager Tool User Guide Page 47