Transform Page - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

Transform Page

Navigation: PRINTER DEFAULTS > PROCESSING DEFAULTS > Transform
If you entered the printer password in the Session Setup, you can change the following
printer default settings for scaling, rotation, mirroring and raster image scale mode:
1. Scaling - Click on the Auto or Absolute radio button to select the type of Scaling.
Ÿ If Auto is selected, the printer will automatically scale the image to the requested
media size. Auto scaling is not allowed for the following paper sizes: ANY, ANY
ANSI, ANY ISO, ANY JIS and ANY ARCH.
Ÿ If Absolute is selected, enter the desired scaling percentage (10 to 999) in the
corresponding text field and the image will be scaled by this percentage. A value of
100 % corresponds to 1:1 scaling.
2. Rotation - Click on the Auto or Fixed radio button to select the Rotation option.
Ÿ If Auto is selected, the printer will determine the most economical rotation for the
document pages.
Ÿ If Fixed is selected, click on the list box to the right to select 0, 90, 180 or 270
degrees for the rotation.
3. Mirror Image - Click on the appropriate check box or boxes to select the mirror
imaging for the plot. You can leave both X and Y unchecked, check either X or Y, or
check both X and Y. When checked, the image will be mirrored in that direction.
4. Raster Image Scale Mode - Click on the Photo or Line radio button to select the
method used when raster images are scaled down. If Photo is selected, a simple
pixel-depleting algorithm will be used. If Line is selected, a pixel-preserving algorithm
will be used.
5. Line Scale Mode - Select the "On" radio button to scale the line (pen) widths along
with the rest of the drawing.
6. Press the Update Printer button to update the default transform parameters in the
printer.
Web Print Manager Tool User Guide Page 49