Adding A Label; Uploading A Stamp To The Printer; Mismatch Queue - Xerox 850DP - Phaser Color Solid Ink Printer User Manual

2. To set the Accounting Mode, click on the Disabled, Enabled, or Optional radio
button.
When Disabled is selected, a valid User and Account ID will not be needed to scan
images, or to print to the printer.
When Enabled is selected, a valid User and Account ID will be required to print to
the printer. Failure to supply valid IDs at the scanner, will result in an "Invalid ID"
message at the scanner.
When sending images from the Document Submit Tool, using invalid IDs will result in
the printing of an Error Page.
When Optional is selected, a User ID and Account ID will not be required to scan or
to print to the printer. If the scan or print job contains valid IDs, however, the Media
Usage data will be logged in the AccXES Controller's Job Log File for the User and
Account specified.
3. Press the Update Printer button to set the Accounting Mode. The AccXES Controller
will send a message back indicating the success or failure of your request.
NOTE: Effective with Firmware 7.0, User IDs and Account IDs are created with the
AccXES Account Management Tool running on a networked client workstation. For
more information, refer to the AccXES Account Management Tool Administrator's
Guide.

Adding a Label

1. Click on PRINTER DEFAULTS > PRINTER SETUP > Plot Labels.
2. Click on Help near the top of your screen for details.

Uploading a Stamp to the Printer

1. Click on PRINTER DEFAULTS > PRINTER SETUP > Stamps.
2. Click on Help near the top of your screen for details.

Mismatch Queue

1. Select PRINTER DEFAULTS > PROCESSING DEFAULTS > Media to display the
Media page.
2. Enabled Checkbox - Click on this check box to enable/disable mismatch queuing.
When a media mismatch occurs, and this box is not checked, the Status column of the
Job Queue List will display Mismatch/Blocked, and printing will pause until the
necessary medium is installed or the job is cancelled. When a media mismatch occurs,
and this box is checked, the Status column of the Job Queue list will display
Mismatch/Queued. In this case, pages requiring the missing medium are not printed,
but pages requiring media which are currently installed will be printed.
3. Press the Update Printer button.
Web Print Manager Tool User Guide Page 15