Windows Nt 4.X; Preliminary Steps; Quick Cd-Rom Install Steps - Xerox 8500DN - Phaser Color Solid Ink Printer Advanced Features Manual

Windows NT 4.x

This section includes:
■

Preliminary Steps

on page 4-11
■

Quick CD-ROM Install Steps

Other Methods of Installation
■
■ Windows NT 4.x Troubleshooting
Preliminary Steps
These preliminary steps must be performed for all printers:
1. Verify that the printer is plugged in, turned On, and connected to an active network.
2. Verify that the printer is receiving network information by monitoring the LEDs on the
back of the device or on the CentreDirect External Print Server. When the printer is
connected to a functioning network and receiving traffic, its link LED is green, and its
amber traffic LED is flashing rapidly.
3. Proceed to Quick CD-ROM Install Steps or Other Methods of Installation for the
installation method desired.
4. Print a Configuration page and keep it for reference.
Quick CD-ROM Install Steps
To use the quick CD-ROM install option:
1.
Insert the Software and Documentation CD-ROM into the computer's CD-ROM drive. If
the installer does not launch, do the following:
a. Click Start, and then click Run.
b.
In the Run window, type: <CD drive>:\INSTALL.EXE.
2.
Select your desired language from the list.
3.
Select Install Printer Driver.
4.
Click I Agree to accept the Xerox Software License Agreement.
5.
In the Select Printer dialog box, the default Use Walk-Up Technology (recommended
for network printers) is selected. Click Next.
6.
Follow the Use Walk-Up Technology instructions displayed.
7.
Click Exit Program.
Note:
If the Walk-Up Technology dialog box remains onscreen after you have completed
Steps 1–6, click the Cancel button, and then click Select from the following discovered
printers. Follow the onscreen prompts to complete the installation procedure.
See also:
Knowledge Base at www.xerox.com/office/8500_8550support
on page 4-11
on page 4-12
on page 4-14
Phaser® 8500/8550 Color Printer
4-11

Windows NT 4.x