Xerox 8500DN - Phaser Color Solid Ink Printer Advanced Features Manual page 73

Controlling Startup Page Printing
The printer can produce a Startup page each time the printer is turned on or reset. The factory
default is On. You can print the Startup page at any time from the
To turn on/off automatic printing of the Startup page, use one of the following options:
■ The printer's control panel
■ CentreWare IS
Using the Control Panel
To turn on/off automatic printing of the Startup page on the control panel:
1. Select Printer Setup, and then press the OK button.
2. Select Printer Controls, and then press the OK button.
Startup Page
The
3. Press the OK button to change the setting.
Using CentreWare IS
To turn on/off the automatic printing of the Startup page using CentreWare IS:
1. Launch your web browser.
2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3.
Click Properties.
4.
Select the General folder on the left sidebar.
5. Select Printer Defaults.
6.
Select Off or On from the Startup Page drop-down list to change the setting.
7.
Click the Save Changes button at the bottom of the page.
Printing the Startup Page from the Control Panel
To print the Startup page on the control panel:
1. Select Information, and then press the OK button.
2. Information
Select
3. Startup Page, and then press the OK button to print.
Select
Note: You can also print the Startup page from the Troubleshooting tab of the Windows
printer driver.
is highlighted. The end of the line displays the setting
Pages, and then press the OK button.
Phaser® 8500/8550 Color Printer
5-4
Printer Settings
Information Pages menu.
or Off).
(On