Configuring the Printer
To configure the printer:
1.
Insert the Software and Documentation CD-ROM into the computer's CD-ROM drive, and
then click Have Disk.
2.
Click the Browse button and select the directory containing the Windows NT drivers.
3.
Select the *.INF file, and then click Open. Verify that the path and filename are correct,
and then click OK.
4.
Select the correct printer, and then click OK.
5.
Enter a name for the printer, select whether you want that printer to be the default, and
then click OK.
6.
Select one of these options:
■
If the printer is not shared, click Next.
■
If the printer is shared, enter a Share Name, check the Share box, and then click Next.
Printing a Test Page
You are prompted to print a test page.
1.
Select one of these options:
■
Click Yes to print a test page, and then click Next.
■
Click No if you do not want to print a test page, and then click Next.
2.
Select one of these options:
Click the Finish button if the data presented is correct. Proceed to Step 3.
■
■
Click the Back button to correct the data if incorrect, and then click Finish when the
data is correct. Proceed to Step 3.
3.
If you printed a test page, you are prompted to confirm that the test page printed:
■
Click Yes if the test page printed successfully.
■
Click No if the test page did not print or printed incorrectly.
See also:
Windows NT 4.x Troubleshooting
on page 4-14
Phaser® 8500/8550 Color Printer
4-13
Windows NT 4.x