Table of Contents
Advertisement
xStatus command reference
The xStatus group of commands are used to return information about the current status of the system.
Each xStatus element returns information about one or more sub-elements.
The following section lists all the currently available xStatus commands, and the information that is
returned by each command.
To obtain information about the existing status, type:
xStatus to return the current status of all status elements
n
xStatus <element> to return the current status for that particular element and all its sub-elements
n
xStatus <element> <sub-element> to return the current status of that group of sub-elements
n
To obtain information about the xStatus commands, type:
xStatus ? to return a list of all elements available under the xStatus command
n
xStatus elements
The current xStatus elements are:
Alternates
n
Applications
n
Calls
n
Ethernet
n
ExternalManager
n
Feedback
n
FindMeManager
n
H323
n
IP
n
LDAP
n
Links
n
Loggers
n
NTP
n
Options
n
Pipes
n
Policy
n
Registrations
n
ResourceUsage
n
SIP
n
SystemUnit
n
TURN
n
Warnings
n
Zones
n
Each element has the sub-elements as described below:
Alternates
Alternates:
Peer [1..6]: {Hidden for Peer [n] when Peer [n] is self}
Status: <Active/Failed/Unknown>
Cause: {visible if status is Failed} <No response from gatekeeper/DNS
resolution failed/Invalid IP address>
Cisco VCS Command Reference (X6)
xStatus command reference
Page 77 of 95
Advertisement
Table of Contents
