Cisco TELEPRESENCE VIDEO COMMUNICATION SERVER - COMMAND REFERENCE V X6 Command Reference Manual page 21

xConfiguration command reference
Login User Source: <Local/Remote>
Defines where user login credentials are authenticated before access is allowed to the VCS.
Remote: credentials are verified against an external credentials directory, for example Windows Active
Directory.
Local: credentials are verified against a local database stored on the VCS.
Default: Local
Example: xConfiguration Login User Source: Local
NTP Address: <S: 0, 128>
Sets the IP address or Fully Qualified Domain Name (FQDN) of the NTP server to be used when
synchronizing system time.
Example: xConfiguration NTP Address: "ntp.server.example.com"
Option [1..64] Key: <S: 0, 90>
Specifies the option key of your software option. These are added to the VCS in order to add extra
functionality, such as increasing the VCS's capacity. Contact your TANDBERG representative for further
information.
Example: xConfiguration Option 1 Key: "1X4757T5-1-60BAD5CD"
Policy AdministratorPolicy Mode: <Off/LocalCPL/LocalService/PolicyService>
Enables and disables use of Call Policy.
Off: Disables call policy.
LocalCPL: uses policy from an uploaded CPL file.
LocalService: uses group policy information and a local file.
PolicyService: uses an external policy server.
Default: Off
Example: xConfiguration Policy AdministratorPolicy Mode: Off
Policy AdministratorPolicy Service DefaultCPL: <S: 0,255>
The CPL used by the VCS when the remote service is unavailable.
Default: <reject status='403' reason='Service Unavailable'/>
Example: xConfiguration Policy AdministratorPolicy Service DefaultCPL: "<reject
status='403' reason='Service Unavailable'/>"
Policy AdministratorPolicy Service Password: <S: 0,82>
Specifies the password used by the VCS to log in and query the remote service. The maximum plaintext
length is 30 characters, which will then be encrypted.
Example: xConfiguration Policy AdministratorPolicy Service Password: "password123"
Policy AdministratorPolicy Service Path: <S: 0,255>
Specifies the URL of the remote service.
Example: xConfiguration Policy AdministratorPolicy Service Path: "service"
Policy AdministratorPolicy Service Protocol: <HTTP/HTTPS>
Specifies the protocol used to connect to the remote service.
Default: HTTP
Example: xConfiguration Policy AdministratorPolicy Service Protocol: HTTP
Cisco VCS Command Reference (X6) Page 21 of 95