Cisco TELEPRESENCE VIDEO COMMUNICATION SERVER - COMMAND REFERENCE V X6 Command Reference Manual page 82

LDAP:
Status: <Inactive/Initializing/Active/Failed>
Cause: {visible if status is Failed} <Failed to connect to LDAP server / The LDAP
server does not support TLS. / Failed to establish a TLS connection to the LDAP
server. Please check that the LDAP server certificate is signed by a CA, and that CA
is included on the CA certificate installed on the VCS. / Failed to authenticate with
LDAP server / A valid CA certificate for the LDAP database has not been uploaded;
this is required for connections via TLS / No server address configured>
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>
Links
Links:
Link [1..100]:
Name: <S: 1,50 Link name>
Bandwidth:
LocalUsage: <0..100000000>
ClusterUsage: <0..100000000>
Calls:
Call [0..900]: {0..900 entries}
CallSerialNumber: <S: 1,255>
Loggers
Loggers
Logger [1..6]
Module:
TraceLevel:
NTP
NTP:
Status: <Inactive/Initializing/Active/Failed>
Cause: {visible if status is Failed} <No response from NTP server/ DNS resolution
failed>
Address: <IPv4Addr/IPv6Addr>
Port: <1..65534>
Last Update: <date-time>
Last Correction: <Time in seconds, precision in seconds>
Options
Options:
Option [1-64]:
Key: <S: 1, 90>
Description: <S: 1, 128>
Pipes
Cisco VCS Command Reference (X6)
xStatus command reference
Page 82 of 95