xConfiguration command reference
SIP TCP Mode: <On/Off>
Determines whether incoming and outgoing SIP calls using the TCP protocol will be allowed.
Default: On
Example: xConfiguration SIP TCP Mode: On
SIP TCP Outbound Port End: <1024..65534>
Specifies the upper port in the range to be used by outbound TCP/TLS SIP connections.
Default: 29999
Example: xConfiguration SIP TCP Outbound Port End: 29999
SIP TCP Outbound Port Start: <1024..65534>
Specifies the lower port in the range to be used by outbound TCP/TLS SIP connections.
Default: 25000
Example: xConfiguration SIP TCP Outbound Port Start: 25000
SIP TCP Port: <1024..65534>
Specifies the listening port for incoming SIP TCP calls.
Default: 5060
Example: xConfiguration SIP TCP Port: 5060
SIP TLS Mode: <On/Off>
Determines whether incoming and outgoing SIP calls using the TLS protocol will be allowed.
Default: On
Example: xConfiguration SIP TLS Mode: On
SIP TLS Port: <1024..65534>
Specifies the listening port for incoming SIP TLS calls.
Default: 5061
Example: xConfiguration SIP TLS Port: 5061
SIP UDP Mode: <On/Off>
Determines whether incoming and outgoing SIP calls using the UDP protocol will be allowed.
Default: On
Example: xConfiguration SIP UDP Mode: On
SIP UDP Port: <1024..65534>
Specifies the listening port for incoming SIP UDP calls.
Default: 5060
Example: xConfiguration SIP UDP Port: 5060
SNMP CommunityName: <S: 0, 16>
Sets the VCS's SNMP community name.
Default: public
Example: xConfiguration SNMP CommunityName: "public"
Cisco VCS Command Reference (X6)
Page 31 of 95