Cisco TELEPRESENCE VIDEO COMMUNICATION SERVER - COMMAND REFERENCE V X6 Command Reference Manual page 33

xConfiguration command reference
SNMP V3 Privacy Password: <S: 0,215>
Sets SNMP Version 3 privacy password. Note: must be at least 8 characters.
Example: xConfiguration SNMP V3 Privacy Password: "password123"
SNMP V3 Privacy Type: <DES/AES>
Sets SNMP Version 3 privacy type.
Example: xConfiguration SNMP V3 Privacy Type: AES
SNMP V3 UserName: <S: 0,70>
Sets the username to use when using SNMP V3.
Example: xConfiguration SNMP V3 UserName: "user123"
SystemUnit AdminAccount [1..15] Access: <AccountDisabled/ReadOnly/ReadWrite/Auditor >
Defines the access level of an administrator user who can login to the VCS web interface.
AccountDisabled: no access allowed.
ReadOnly: configuration can only be viewed.
ReadWrite: configuration can be viewed and changed.
Auditor: allows access to the Event Log, Configuration Log and the Overview page only.
Default: ReadWrite
Example: xConfiguration SystemUnit AdminAccount 1 Access: ReadOnly
SystemUnit AdminAccount [1..15] Name: <S:0,25>
Defines the name of an administrator user who can login to the VCS web interface.
Example: xConfiguration SystemUnit AdminAccount 1 Name: "guest"
SystemUnit AdminAccount [1..15] Password: <S:0,65>
Defines the password of an administrator user who can login to the VCS web interface. The maximum
plaintext length is 16 characters, which will then be encrypted.
Example: xConfiguration SystemUnit AdminAccount 1 Password: "password123"
SystemUnit Maintenance Mode: <On/Off>
Sets the VCS into maintenance mode. New calls and registrations are disallowed and existing registrations
are allowed to expire.
Default: Off
Example: xConfiguration SystemUnit Maintenance Mode: Off
SystemUnit Name: <S:, 0, 50>
Defines the name of the VCS. Choose a name that uniquely identifies the system.
Example: xConfiguration SystemUnit Name: "VCS HQ"
SystemUnit Password: <S: 0, 65>
Defines the password for the default 'admin' account. This account is used to log in to the VCS via Telnet,
HTTP(S), SSH, SCP, and on the serial port. The maximum plaintext length is 16 characters, which will then
be encrypted.
Example: xConfiguration SystemUnit Password: "password123"
Cisco VCS Command Reference (X6) Page 33 of 95