Intercom; Transferring Calls Between Handsets; Conference - Doro 930R Manual

English

Intercom

When using more than one handset with the same base unit, calls can be made
internally between the handsets referred to as internal calls, or intercom. Intercom
calls can only be made between handsets connected to the same base unit
1. Press .
i
2. Enter the handset number for the handset that you wish to call,
3. To answer the call press
Should an external call be received while an intercom call is in progress, a tone will
be heard and EXT will fl ash in the display. Terminate the intercom call by
pressing , press , press
q q q

Transferring calls between handsets

An external call can be transferred from one handset to another (providing both
handsets are operating on the same base unit).
1. While an external call is connected on line.
2. Press .
i
3. Enter the handset number for the handset that you wish to call,
4. To transfer the external call press
If you decide not to transfer the call, press
external caller.

Conference

A conference call allows two handsets and an external caller to be on line at the
same time.
1. While an external call is connected on line.
2. Press
.
i
3. Enter the handset number for the handset that you wish to call,
4. To answer the call press
5. To connect all three parties in a conference call, press and hold
telephone number or CALL is displayed.
Press on either handset to terminate the conference call, the other handset can
q
then continue the conversation with the external party.
26 26 26
Expanded System
on the handset being called. on the handset being called.
q q q
again to answer the incoming call.
q
on the handset being called. on the handset being called.
q q q
on the calling handset. on the calling handset.
q q q
on the calling handset to return to the
i
- .
1 5
- .
1 5
- .
1 5
until the
#
www.doro.com www.doro.com