Caller Identifi Cation - Doro 930R Manual

English
Explanation of Caller ID
Caller ID allows you to see who is calling before you answer a call, while you
are on a call and see who has called in your absence. If the number received is
stored in the phone book with a name attached, the name will be displayed.
The call log will store up to 20 telephone numbers. When the log is full the
oldest number will be deleted automatically, as the new call is logged.
New calls are indicated in standby mode with a fl ashing
While scrolling through the Caller ID log the start/end of the list will be
indicated be a long beep.
Please note!
In order for numbers to be shown, you must subscribe to the Caller ID service provided by
your network operator and a current subscription in place. Contact your operator for more
information.
Retrieving and dialling incoming numbers.
1. Press
2. Scroll /
{ }
the call was logged will now be displayed.
3. Press
to dial the displayed number, or press and hold to dial the displayed number, or press and hold
q q q
standby mode.
Messages
Besides showing telephone numbers, the display may also show a number of
messages.
UNAVAIL.
WITHHELD.
o
12 12 12

Caller Identifi cation

.
to the required telephone number. Press
It is an International call or a call from a PBX (no information
received)
Information on the number is blocked. The call could also be
from a PBX.
A message has been left at your network message service.
This feature may not work in all countries.
in the display in the display in the display
the time and date the time and date
0 0 0
x to return to
www.doro.com www.doro.com
. .