Table of Contents
Advertisement
English
Switching the answering machine On/Off
Press
on the base unit to switch the answering machine On or Off. Upon
!
switching this function on "Answer on" and the outgoing message will be
heard.
In the ON position (Answer on), incoming calls will be answered by the
answering machine. In the OFF position (Answer off) no calls will be answered
and
will fl ash in the base unit display.
-
Outgoing message (OGM)
The OGM is your announcement to the caller and may be up to 3 minutes in
length, however, the longer the OGM message the less remaining memory for
any ICM messages. If you choose not to record your own OGM, the caller will
hear a pre-recorded OGM.
There are two separate OGM messages: one for Answer only (ANN) where a
caller cannot leave a message, and one for normal answering operation.
An example OGM message:
-"Hello, we are unable to take your right now, please leave a message after the
beep, and we'll return your call as soon as possible. Thanks for calling."
An example ANN message:
-"Hello, we are unable to take your right now, you will be unable to leave a
message so please call later."
Selecting answering function and checking message (base unit)
1. Press and hold
2. Press
for the normal outgoing message (OGM) or
8 8
(ANN).
3. The display will fl ash
be heard.
28
28
28
The answering machine
until you hear "Please select outgoing message".
!
(OGM) or
P 1
(ANN). The selected message will
P2
for Answer only
9 9
www.doro.com
www.doro.com
Advertisement
Table of Contents
