Table of Contents
Advertisement
Recording an Outgoing Message (base unit)
1. Press and hold
2. Press
for the normal outgoing message (OGM) or
8 8
(ANN).
3. The display will fl ash
be heard.
4. To record your OGM message press and hold
beep and the display will fl ash.
5. To record your ANN message press and hold
and the display will fl ash.
6. When recording speak clearly towards the top of the base unit from a
distance of approximately 15-20 cm.
7. Release the button (
Release the button (
Release the button (
8. The message will be replayed after a few seconds.
Repeat this procedure if you wish to change the OGM/ANN message. Any old
OGM/ANN message will automatically be erased when a new one is recorded.
Please Note!
Recording your outgoing message (OGM) through the handset (command
sound quality, please refer to page 35.
Reset the OGM to the factory message (base unit)
This allows you to reset the OGM back to the original factory message.
1. Press
until you hear "Answer On, your outgoing message is".
!
2. While the OGM is playing press C.
www.doro.com
The answering machine
until you hear "Please select outgoing message".
!
(OGM) or
P 1
/
) to stop recording.
) to stop recording.
8 8
8 8
9 9
9 9
9 9
(ANN). The selected message will
P2
. You will hear a short
8 8
. You will hear a short beep
9 9
English
for Answer only
9 9
) could improve
) could improve
83
83
83
29
Advertisement
Table of Contents
