Table of Contents
Advertisement
Multiple Handsets
The combination of multiple base units and multiple handsets provides for many
useful applications. So long as all handsets are programmed to the same base unit.
-
Any handset can answer incoming calls, and make outgoing calls.
-
External calls can be transferred between handsets.
-
Internal handset to handset communication (intercom).
Base Units Placement
If you wish to use several handsets with one base unit, you should make sure that
the base unit is placed "in the middle", to evenly divide the base unit range among
the handsets.
If you wish to use several base units to achieve an extended coverage within a specific
area, eg a large home or office, a storage area, etc, then it is important that the range
of the base stations overlap. If not there may be a reduced communication in certain
areas where a handset has no signal from the base units.
Intercom Function
When using several handsets with the same base unit, calls can be made internally
between the handsets, this is referred to as an internal call. Internal calls can only be
made between handsets operating on the same base unit.
1. Press
.
i
2. All other handsets will now ring.
3. Answer the call by pressing
If an external call is received while an intercom call is in progress, a tone will be
heard. You will then have to terminate the intercom call to answer.
Transferring Calls Between Handsets
An external call can be transferred from one handset to another (so long as both
handsets are operating on the same base unit).
1. While an external call is connected on line.
2. Make an internal call according to the description above. A tune will be played
to the incoming caller.
3. Transfer the call by pressing
the other handsets.
If you decide not to transfer the call, press
external caller.
www.doro.com
Expanded System
on one of the other handsets.
o
. Answer the call by pressing
o
on your handset to return to the
i
English
on one of
o
19
Advertisement
Table of Contents
