Table of Contents
Advertisement
Multiple Handsets
The combination of multiple base units and multiple handsets provides for many
useful applications.
-
Any of 6 handsets can answer incoming calls and make outgoing calls.
-
External calls can be transferred between handsets.
-
Internal handset to handset communication (intercom).
-
The system allows for conference calls where two handsets can communicate
with an external caller at the same time.
Placement of Base Units
If you wish to use several handsets with one base unit, you should make sure
that the base unit is placed "in the middle", so that the range will be evenly
divided among the handsets.
If you wish to use several base units to achieve an extended coverage within
a specific area, e. g. a large home or office, a storage area, etc. then it is
important that the range of the base stations overlap. If not, there may be
reduced communication in certain areas where the handsets have no signal from
the base units.
Intercom Function
When using several handsets with the same base unit, calls can be made
internally between the handsets, referred to as internal calls, or intercom.
Internal calls can only be made between handsets connected to the same base
unit
1. Press
until
w
2. Scroll to
Int CALL
3. Press
for a general call (to all handsets) or enter the handset number
*
of the handset you wish to call.
Should an external call come in while an internal call is in progress, a tone will
be heard and the
www.doro.com
Expanded System
PHOnE LISt SEt
. Press
.
0
symbol flash. Receive the external call by pressing
Q
is shown.
English
-
1
6
.
R
25
Advertisement
Table of Contents
