Expanded System (+1; Base Unit Placement; Intercom; Transferring Calls Between Handsets - Doro 131 Manual

Base Unit Placement

The base unit should be centrally positioned so that the area covered is roughly
equal for both handsets.
It is NOT possible to add additional handsets at a later time.

Intercom

When using handsets with the same base unit, calls can be made internally
between the handsets referred to as internal calls, or intercom.
1. Press and hold
2. Enter the handset number for the handset that you wish to call,
3. Press
on the other handset, you can now talk between handsets.
q
Should an external call come in while an internal call is in progress, a tone will
be heard. You must then terminate the internal call by pressing
again to receive the external call.

Transferring Calls Between Handsets

An external call can be transferred from one handset to another.
1. While an external call is connected.
2. Press and hold
3. When the call has been answered on the other handset press
calling handset to transfer the call.
If you decide not to transfer the call press and hold
handset to return to the external caller.
www.doro.com

Expanded system (+1...)

until the display shows
R
until the display shows
R
.
int
.
int
again on the calling
R
English
- .
1 4
, press
q q
on the
q
1