Inspect the rear brake lever and cable for excessive
play or other damage.
Replace or repair if necessary.
Measure the free play of the rear brake lever at the end of
The standard is 15-25 mm.
the lever.
BRAKE SHOE WEAR
FRONT BRAKE
Release the front wheel and inspect the brake lining
thickness.
Service Limit: 2.0mm(0.08 inch)
If either lining is worn beyond the service limit, replace
Both brakes shoes.
2.11 WHEELS AND TIRES
Inspect the tire surfaces for cuts, nails or other sharp objects.
Check the tire surfaces at cold tire condition.
The standard of tire pressure is 1.2±0.3 psi.
(0.8 kgf/cm 2 )
2.12 STEERING SYSTEM
Check the free play of the steering shaft with the front wheels,
turned straight ahead.
When there is excessive play, inspect the tie-rod, kingpin
bushing and ball joint.