Advertisement
SR870BH2 Feature Dependencies
Feature
Required Hardware for Model 0 (SBHG2)
1 to 2 Processors
One processor heat sink and one power pod
for each processor, plus 1 Y-cable for each
pair of power pods.
Thermal Blanks are required in empty CPU
slots (one included in Model 0).
8 DDR DIMM
Memory must be installed in groups of 4
slots
DIMMs (details on DIMM order are provided
in the Product Guide
Redundant Power
Model 0 has 2 power supplies. A 3
Supplies
supply must be added if redundancy is needed
(100 – 240V).
2 Hot Plug SCSI
Requires ½ inch height (slim line), 3.5 inch
disk drives
SCSI drives and insert into carriers provided
with system. See Intel's list of supported
drives
Embedded
Model 0 contains an onboard controller with 2
Network
Ethernet ports.
Controller (NIC)
IDE Devices
Model 0 includes (1) CDROM / DVD combo
devices. See Intel's list of supported drives
SR870BH2 - Power Subsystem Supported Features
The SR870BH2 comes with 2 power supplies, which is sufficient for any configuration of processors,
memory and I/O devices possible at 100V – 240Vac, but does not provide redundancy (3 power supplies
are required for redundancy). A filler panel must be installed in systems using only 2 power supplies.
1
See "Reference Information" section on page 7 for details on available documents
1
See "Reference Information" section on page 7 for details on available documents
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
1
).
1
.
Required Hardware for Model 1 (SBHG2X)
Model 1 includes two processors with heat
sinks, two power pods, and a Y-cable which
supports the two power pods.
N/A
Model 1 includes 4 x 1GB DIMMs. Additional
memory must be installed in groups of 4
DIMMs (details on DIMM order are provided
in the Product Guide
rd
power
Model 1 has 2 power supplies. A 3
supply must be added if redundancy is needed
(100 – 240V).
Model 1 includes (1) 36GB SCSI HDD. A
second SCSI HDD may be installed in the
carrier provided with the system. See Intel's
list of supported drives
Model 1 contains an onboard controller with 2
Ethernet ports.
Model 1 does NOT include an optical device.
1
.
See Intel's list of supported drives
Intel Confidential
1
).
rd
power
1
.
1
.
3
Advertisement
