Removing A Fixed Hard Disk Drive (Sr2520Saf/Sr2520Safr); Figure 30. Removing Fixed Hard Drive(S) From The Server System (Sr2520Saf/Sr2520Safr) - Intel SR2520SAXSR - Server System - 0 MB RAM User Manual

Removing a Fixed Hard Disk Drive (SR2520SAF/
SR2520SAFR)
1. Remove the server system cover.
2. Remove the four screws that attach the hard drive cage to the server system (see
letter "A" in the figure below) and remove the hard drive cage.
3. Remove the four screws that attach the hard drive to the drive cage. Remove the
drive from the hard drive cage (see letter "B" in the figure below). Store the drive in
an anti-static bag.
Figure 30. Removing Fixed Hard Drive(s) from the Server System
4. Insert the screws that held the drive in the carrier into the screw locations on the
hard drive cage for future use.
5. Using the four screws you removed in step 2, secure the hard drive cage into the
server system.
6. Install the server system cover. For instructions, see
7. Plug all peripheral devices and the AC power cable(s) into the server.
®
Intel Server System SR2520SA User's Guide
A
B
(SR2520SAF/SR2520SAFR)
AF001646
"Installing the System Cover".
43