7. Install the optical drive to the drive bracket (see letter "A" in the figure below) and
secure it with four screws (see letter "B" in the figure below).
8. First time installation: remove the optical drive knockout in the chassis sheet meta
as shown in the figure belowl.
9. Lower the drive bracket into the system and slide it forward into place (see letter
"A" in the figure below).
10. Secure the drive bracket into place with four screws (see letter "B" in the figure
below).
®
Intel
Server System SR2520SA User's Guide
B
Figure 32. Installng Optical Drive into the Drive Bracket
Figure 33. Removing Optical Drive Knockout
A
AF001827
AF001826
45