3
Hardware Installations and
Upgrades
Before You Begin
Before working with your server product, pay close attention to the
at the beginning of this manual.
Tools and Supplies Needed
•
Phillips* (cross head) screwdrivers (#1 bit and #2 bit)
•
Needle nosed pliers
•
Antistatic wrist strap and conductive foam pad (recommended)
System References
All references to left, right, front, top, and bottom assume the reader is facing the front of
the server system as it would be positioned for normal operation.
Removing and Installing from a Rack
Two Intel
rack. The options are the fixed bracket kit and the basic rail kit.
Note: Follow all safety guidelines while removing a system from a rack to avoid injury.
Fixed Bracket Rack Mount Removal
1. Disconnect all cables from the back of the system.
Note: Remember to use the system LED to properly identify the system you are servicing.
2. Remove screws from the brackets and remove the system from the rack.
®
rack options are available to install the Intel
"Safety Information"
®
Server System SR2520SA in a