Chapter 5. I/O connectors
Your server has the following input/output (I/O) connectors:
v Two Ethernet (rear)
v One serial (rear)
v Four Universal Serial Bus (USB) (two front, two rear)
v One video (rear)
The following illustration shows the locations of the connectors on the front of the
server.
The following illustration shows the locations of the connectors on the rear of the
server.
Power-cord
connector
The following sections describe these connectors.
If an optional Remote Supervisor Adapter II (system-management adapter) installed
in PCI-X slot 1, the adapter has an Ethernet connector, a serial connector, and an
Advanced System Management (ASM) Interconnect connector. See the
documentation that comes with the Remote Supervisor Adapter II for more
information about these connectors and LEDs.
© Copyright IBM Corp. 2002, 2003
Serial
connector
Video
USB connectors
connector
USB 2 connector
USB 1 connector
Gigabit Ethernet 1
connector (LAN1)
Gigabit Ethernet 2
connector (LAN2)
57