IBM 326m - eServer - 7969 Hardware Maintenance Manual page 102

Note: See "System" on page 100 to determine which components should be replaced by a field service technician.
Error code/symptom
1762
(Hard disk configuration error)
1801
(No room for PCI option ROM)
1803
(No memory above 1MB for PCI adapter)
1962
(Drive does not contain a valid boot
sector)
2462
(Video memory configuration error)
5962
(IDE CD-ROM drive configuration error)
8603
(Pointing-device error)
0001200
(Machine check architecture error)
00012000
(Microprocessor machine check)
00180700
(Planar PCI device not responding)
01298001
(No update data for processor 1)
01298002
(No update data for processor 2)
01298200
(Microprocessor speed mismatch)
92
326m Type 7969: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. Hard disk drive.
2. Hard disk drive cables.
3. Run the Configuration/Setup Utility program.
4. SCSI backplane.
5. System board.
1. Adapter configuration.
2. Hard disk drive cables.
3. Failing adapter.
4. System board.
1. Run the Configuration/Setup Utility program and diagnostics.
2. Failing adapter.
3. System board.
1. Verify that a startable operating system is installed.
2. Run diagnostics.
3. Hard disk drive.
4. SCSI backplane.
5. Cable.
6. System board.
1. Video adapter (if installed)
2. System board
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
1. Pointing device
2. System board
1. Microprocessor 1.
2. Optional microprocessor 2.
3. System board.
1. Microprocessor.
2. System board.
v System board.
v Microprocessor 1.
v Microprocessor 2.
v Microprocessor.