Logging Options - HP BB118BV - StorageWorks Data Protector Express Package User Manual

Determines the kind of log that Data Protector Express keeps of the current job. The Log type is either
None, Log only failed, Log only completed or Log all.
After a job is run, you can view or print the log to see which files were successfully or unsuccessfully
backed up, restored or verified. The default value is Log only failed, which writes to the log any files that
were not successfully backed up, restored or verified.
Instructs Data Protector Express to not keep a log of the backup job as it runs.
Instructs Data Protector Express to log the name of any selected file that was not
successfully backed up, restored or verified.
Instructs Data Protector Express to log the name of any file selected for and
successfully backed up, restored or verified.
Instructs Data Protector Express to log the name of every file selected and whether or not that file
was successfully backed up, restored or verified.
If you choose the Log All setting under the Log options for a job, your log files might be very
large. Creating and viewing very large log files can slow performance. HP recommends that you choose a
setting that creates a smaller log file (e.g., Log only failed, Log only completed) if you intend to view log
files while running Data Protector Express. If you need to create verbose log files, HP recommends that
you save them and view them with an Internet browser or word processor.
The Log format can be one of the following types: HTML, XML, Excel CSV, or plain
text. Specify the path and filename for the log file.