Netware And The Data Protector Express Agent; Running The Data Protector Express Agent; Stopping The Data Protector Express Agent; Linux And The Data Protector Express Daemon - HP BB118BV - StorageWorks Data Protector Express Package User Manual

•
•
changes the status, use one of the following commands:
•
•
The Data Protector Express agent extends the basic Data Protector Express service functionality to
NetWare. Like the Data Protector Express service, it can be loaded when the system is started and will
run in the background.
The Data Protector Express agent and Data Protector Express cannot run at the same time. Therefore, you
must stop one before you can start the other.
To automatically run the Data Protector Express agent each time the system is restarted, add the following
line to the end of the AUTOEXEC.NCF file:
load dpagent
To manually run the Data Protector Express agent, type load dpagent from the console prompt and press
Enter.
Once loaded, the Data Protector Express agent status appears on the screen.
To manually stop the Data Protector Express agent:
1. Use Alt-Esc to display the Data Protector Express Agent screen.
2. Press Esc.
3. When the Exit Data Protector Express message appears, select Yes and press Enter.
On Linux platforms, the Data Protector Express service, or daemon, is designed to run automatically each
time the system is restarted.
The daemon program (dplinsvc) is located in the Data Protector Express directory. To access the
service in the default installation directory you would type cd /usr/local/hp/dpx/dplinsvc
and press Enter.
Select Manual if you intend to start the Data Protector Express service each time you
want it to run. You can run it from a command prompt or by starting it on the Windows Services
screen.
Select Disabled if you want to stop the Data Protector Express service indefinitely.
Once disabled, all commands are disabled for the service, including the ability to start the service.
The status of the Data Protector Express service is displayed below the Startup type. To
Select this command to start the Data Protector Express service. The Start Pending
message appears, and the status of the service changes to Started. Your backup jobs will
automatically start as scheduled.
Select this command to stop the Data Protector Express service. The Stopping message
appears, and the status of the service changes to blank. Your backup jobs will not automatically
start as scheduled. Selecting this option does not affect the Startup type option.