Route Information; Other Function Limitations - Pioneer AVIC-D3 - Navigation System With DVD Player Operation Manual

• If a route calculation is operated within an
areas not stored on the disc, the route might
not be set from the streets you are currently
driving. Also, if you set the destination in an
area not stored on the disc of the disc, the sys-
tem may not be able to set the route up to the
destination.
• If the vehicle deviates from the set route in an
area not stored on the disc, the Auto Reroute
function will not work.
• Even if "Close-up of Junction" is "On", the
display will not switch to an enlarged map of
the junction.
• Even if you drive on the freeway, lane informa-
tion, freeway exit numbers and freeway signs
will not be displayed.

Route information

• If the set route goes through an area not stored
on the disc, no route profile for that area will be
displayed. (If the set route traverses both an
area not stored on the disc and area stored on
the disc, only the route profile within the area
stored on the disc will be displayed.)
• Route scrolling for an area not stored on the
disc is possible only with a map scale of 0.5 mi
or above.

Other function limitations

Overlay POI
• Only display "City Center" is available in an
area not stored on the disc.
Memory mode
• Only data for areas stored on the disc can be
memorized. (Data for areas not stored on the
disc cannot be memorized.)
• If the vehicle enters an area not stored on the
disc, preparation for memory navi mode will
have to be redone after the vehicle returns to
an area stored in the disc. (Preparation for the
memory navi mode starts from the location
where the vehicle re-entered the area stored on
the disc.)
Avoid area
• An area not stored on the disc cannot be set as
an Areas to Avoid.
❒ A set Areas to Avoid may be deleted when
the software is updated. If this happens, the
system will automatically try to recover the
deleted information, but data can be recov-
ered only for areas stored on the disc. For
items that could not be recovered, a recovery
process will begin when you set another disc.
141