Editing The Pin Code; Switching The Sound Muting/Attenuation - Pioneer AVIC-D3 - Navigation System With DVD Player Operation Manual

woofer (Rear SP Sub. W) connection. If you
switch the rear output setting to the Rear SP
Sub. W, you can connect a rear speaker lead
directly to a subwoofer without using an auxiliary
amp.
Initially, the navigation system is set for rear full-
range speaker connection (Rear SP Full). When
rear output is connected to full range speakers
(when Rear SP Full is selected), you can con-
nect the RCA subwoofer output to a subwoofer.
In this case, you can select whether to use the
subwoofer controller's (low pass filter, phase)
built-in Preout Sub. W or the auxiliary Preout
Full.
1
Touch "Rear SP" in the Initial menu.
2
Touch "Rear SP" to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select Full.
When a subwoofer is connected to the rear
output, select Sub. W.
❒ When the rear output setting is Sub. W,
you cannot change the subwoofer control-
ler.
3
Touch "Preout" to switch the subwoofer
output or non fading output.
❒ Even if you change this setting, there is no
output unless you turn "Non Fading" or
"Sub Woofer" in the Sound menu "On".
➲ "Using non fading output" ➞ Page 119
➲ "Using subwoofer output" ➞ Page 119
❒ If you change the subwoofer controller
(Rear SP), the subwoofer output (Sub
Woofer) and non fading output (Non Fad-
ing) in the Sound menu return to the fac-
tory settings.
❒ Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.

Editing the PIN code

You can edit the PIN code you like. Use this func-
tion when you need to change the PIN code from
the default setting.
1
Touch "PIN Edit" in the Initial menu.
2
Touch number key to enter the new PIN
code.
Bluetooth Device (BD) address
Version of the Bluetooth module
System (microprocessor) version
3
Touch "Enter" to fix the new PIN code.
❒ The default setting of the PIN code is 0000.
❒ When a cellular phone finds the device
which can be connected by the Bluetooth
technology, "Pioneer BT unit" will appear
in the cellular phone's display.
Switching the sound muting/
attenuation
Sound from this system is muted, attenuated or
mixed automatically in the following cases:
• When a call is made or received using a cellu-
lar phone connected to navigation system.
• When the voice guidance is output.
❒ The sound muting/attenuation function does
not work when you use a cellular phone con-
nected to the navigation system via the Blue-
tooth adapter, which is sold separately.
1
Touch "Mute Input/Guide" in the Initial
menu.
Each touch of the "Mute Input/Guide"
changes the settings as follows:
• Mute— Muting
• ATT — Attenuation
• Normal — Volume does not change
❒ Operation returns to normal when the
phone connection (the mute signal on the
yellow/black lead) is ended or when the
navigation guidance is ended.
❒ Even when you receive a phone call, navi-
gation voice guidance cannot be attenu-
ated or muted. Use Hardware Volume to
control the navigation voice guidance vol-
ume.
PIN code
123