When the installation is complete, the open-
ing display appears.
5
Press the MAP button to change to the
navigation screen.
Some time is needed until navigation is ready.
6
Check the details of the cautionary mes-
sage and touch "OK".
7
To set the time difference, touch "+" or
"–".
The time difference between the time origi-
nally set in the navigation system (Pacific
Standard Time) and the current location of
your vehicle is shown. If necessary, adjust the
time difference. Touching "+" or "–" changes
the time difference display in one-hour incre-
ments. The time difference can be set from
+3 to –3 hours.
Time difference
8
If necessary, set to summer time.
Daylight Saving Time (DST) is off by default.
Touch "Off" to change the time if you are in
the daylight saving period. This turns the dis-
play below summer time "On".
9
To complete the setting, touch "Back".
The map of your surroundings appears.
This completes the setup of your navigation sys-
tem. Chapter 1 explains the basic operation of
your navigation system.
➲ To change the time later ➞ Page 75
131
Need help?
Do you have a question about the AVIC-D3 - Navigation System With DVD Player and is the answer not in the manual?
Questions and answers