Switching Between The Detail Information Dis- Play And The Preset List Display; Storing And Recalling Broadcast Frequencies - Pioneer AVIC-D3 - Navigation System With DVD Player Operation Manual

3
To perform manual tuning, touch
or briefly.
The frequencies move up or down step by
step.
4
To perform seek tuning, keep touching
or for about one second and
release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception
is found.
You can cancel seek tuning by touching either
or briefly.
If you keep touching
skip broadcasting stations. Seek tuning starts
as soon as you release the keys.
Switching between the detail
information display and the pre-
set list display
You can switch the left side of the basic screen
according to your preference.
1
Touch "Detail" (or "Preset").
Each touch of "Detail" (or "Preset") changes
the detail information display or preset list dis-
play.
Preset list display
Detail information display
Storing and recalling broadcast
frequencies
If you touch any of the preset tuning keys P1
(PRESET 1) — P6 (PRESET 6) you can easily store
up to six broadcast frequencies for later recall
with the touch of a key.
or you can
1
2
Preset tuning keys (P1 — P6)
When you find a frequency that you want
to store in memory, keep touching a pre-
set tuning key P1 — P6 until the preset
number (e.g., P.CH 1) stops flashing.
The number you have touched will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
❒ Up to 18 FM stations, 6 for each of the
three FM bands, and 6 AM stations can be
stored in memory.
The next time you touch the same preset
tuning key P1 — P6, the radio station fre-
quency is recalled from memory.
❒ You can also use  and  to recall radio
stations frequencies assigned to preset
tuning keys P1 — P6.
87