Defined Locations; Tracking Display; Arrow In Av; Av Guide Mode - Pioneer AVIC-D3 - Navigation System With DVD Player Operation Manual

Tracking Display

The tracking display setting has the following
options.
Always:
Display tracking for all journeys.
This Trip:
Display tracking dots but erase them when the
navigation system is turned off (when turning off
the engine of your vehicle).
Off*:
Do not display tracking dots.

AV Guide Mode

Set whether to automatically switch to the navi-
gation screen from the AV screen when your vehi-
cle approaches a guidance point such as an
intersection while displaying a screen other than
navigation.
On*:
Switches from audio operation screen to naviga-
tion screen.
Off:
Does not switch the screen.

Day/Night Display

To improve the visibility of the map during the
evening, you can change the combination of the
colors of the map.
Nighttime*:
You can change the combination of the colors of
a map according to whether the vehicle lights are
On or Off.
Daytime:
The map is always displayed with bright colors.

Close-up of Junction

This setting enables switching to an enlarged
map around the point where your vehicle is
approaching an intersection, entrance/exit of
freeway or a junction.
On*:
Switches to an enlarged map.
Off:
Does not switch to an enlarged map.
74

Arrow in AV

Set whether to display the guidance information
with arrows on the Audio Operation screen.
On*:
Displays guidance information with arrows on
the Audio Operation screen.
Off:
Does not display guidance information with
arrows on the Audio Operation screen.
❒ When using a source with video, the arrow
cannot be displayed.

Defined Locations

Touch "Defined Locations" in the Settings
menu to display.

Set "Home"

➲ Registering and changing your home location
➞ Page 53

Map In Memory

The memory area is the area in the map, which is
being read in advance for the memory navi mode.
There are two ways of setting the memory area.
Around Current Position
A square that has sides of approximately 10.6
mile (17 km) with the selected location at the cen-
ter is read into the memory.
Indicate the map you want to store in the memory
by touching , ,  or . Then, adjust the map
scale to the one you desire, and touch "OK".
Continuously touching , ,  or  allows you
to rapidly scroll the map screen.
❒ An area not stored in the DVD Map Disc can-
not be memorized.