Fuel Tank - DAELIM ET-250 Service Manual

5-9 Fuel Tank

Fuel unit removal
Open the seat.
Remove the front cover and fuel tank.
Remove the side covers and lower side covers.
Remove the front fender.
(Covers remove please
Disconnect fuel unit coupler.
Remove fuel unit (4 bolts).
Caution
£»Do not bend the float arm of fuel unit
£»Do not fill out too much fuel to fuel tank.
uel unit inspection (Refer to electrical equipment
F
chapter 17).
Fuel unit installation
Install the gauge in the reverse order of removal.
Caution
Do not forget to install the gasket of fuel unit or
damage it.
Fuel tank removal
Open the seat.
Remove the front cover and fuel tank.
Remove the side covers and lower side covers.
Remove the front fender.
(Covers remove please
Disconnect fuel unit coupler.
Remove fuel unit (4 bolts).
Remove the fuel tube.
Remove the
vacuum tube
Remove fuel tank front and rear side 4 bolts, and then
remove fuel tank.
Installation
Install the tank in the reverse order of removal.
13)
refer chapter
13)
refer chapter
.
4 bolts
Coupler
Fuel tube
Vacuum tube
FRONT
REAR
4 bolts