Carburetor Remove / Install - DAELIM ET-250 Service Manual

5-4 Carburetor Remove / Install

Removal
Drain out fuel in the float chamber.
Drain bolt
1 screw
Loosen the choke cable fixed iron sheet screw from
plate.
Remove the choke cable.
Choke cable
Disconnect the fuel hose.
Vacuum pipe
Fuel pipe
Release the clamp strip of air cleaner.
Remove the carburetor upper parts from the
carburetor.
Clamp
Release the 2 nuts of carburetor insulator, and then
remove the carburetor.
Installation
Install in reverse order of removal procedures.
2 nuts