Exhaust Pipe Removal - DAELIM ET-250 Service Manual

16.4EXHAUST PIPE REMOVAL

You must wait at least 15 minutes after stopping the engine.
You need to remove the seat, rear fender and footrest plate,
before you take off the exhaust pipe.
Loosen the two exhaust pipe bolts that fixed on the engine.
Warning¡G DO NOT service the exhaust pipe while they are hot.
Remove the exhaust pipe bolts mounting on the frame
below the seat.
Remove the exhaust pipe carefully.
Nuts
Bolts
Bolt
EXHAUST PIPE INSTALLATION
Installation is the reverse order of removal.
Torque: Exhaust muffler bolts 30 N.m (22 lbf.ft)
CATUATION:
After installing, make sure that there are no exhaust leaks.