Throttle Housing; Steering System - DAELIM ET-250 Service Manual

13.4 THROTTLE HOUSING

DISASSEMBLY
Loosen the screws on the throttle housing cover.
Remove throttle housing cover and gasket.
Disconnect throttle cable from the throttle arm
and remove from the throttle housing.
NOTE:
Assembly is in the reverse order of disassembly.
Screws

13.5 STEERING SYSTEM

When the steering shaft needs to be repaired, you need to remove three kinds of components: the tie -rods, front wheels
and hub assy. Following the steps to check these components, if broken please change the new one