Rear Fenders Removal - DAELIM ET-250 Service Manual

16.2 REAR FENDERS REMOVAL

There are two seat release bars located at the right
and left hand side of the seat. Please remove the seat
first.
Procedures of remove the rear fender:
Remove the rear rack.
1. Open the seat.
2. Loosen four bolts which connect the front fender and
rear fender.
3. Loosen three bolts, which connect the rear tender
and frame, these two bolts just below the seat.
Loosen the three screws which connect
with footrest plate.
Pull the rear fender backward.
So the rear fender can be removed.
Release Bar