DAELIM ET-250 Service Manual page 155

To replace the direction lights must loosen the screws
as shown in picture.
Screws
Direction light
Front position light removes
There are two screws inside the cap.
Please disassemble first then push the cap upward.
You could replace the electrical bulb.
Front position light
Turn around the cap, you could see the connector.
Turn the seat to replace the electrical bulb.
TAILLIGHT
The taillight combines a position and a rear brake light.
Normally, when users switch the key to "ON" position, the
front
& rear position lights are always keep the light slightly.
Until a brake handlebar is depressed, the rear position light
become more light
Taillight