Specifications - Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual

Specifications

WAP4410N Wireless-N Access Point with Power Over Internet
This appendix details the specifications of the Cisco WAP4410N Wireless-N
Access Point with Power Over Ethernet.
WAP4410N Specifications
Model
Standards
Ports
Buttons
Cabling Type
LEDs
Operating System
Web UI
SNMP Version
Event Logging
Web F/W Upgrade
Diagnostics and Flash
DHCP
HTTP Redirect
IPv6 Host
WAP4410N
Draft IEEE802. 1 1n, IEEE802. 1 1g, IEEE802. 1 1b, IEEE802.3,
IEEE802.3u, IEEE802.3af (Power Over Ethernet), 802. 1 x
(Security Authentication), 802. 1 1i Security WPA/WPA2,
WMM
Ethernet, Power
Reset
UTP Cat 5e or higher
Power, Ethernet, Wireless, POE
Linux
Built in Web UI for Easy browser-based configuration
(HTTP/HTTPS)
Versions 1 and 2c
Email logging, Remote Syslog
Firmware upgradeable through web-browser
Flash, RAM, LAN, WLAN
DHCP Client
Redirects initial user access to an external Web Server to
display company logo or network usage policy
Support for management and control of access point over
IPv6. Supports RFC2460 (IPv6 protocol) and RFC4294
(IPv6 Node Requirements)
D
79