Configuring the WAP4410N Wireless-N Access Point
Administration
STEP 2
STEP 3
WAP4410N Wireless-N Access Point with Power Over Internet
Upgrade the access point's firmware:
a. Download the firmware upgrade file from:
www.cisco.com/en/US/products/ps10052/index.html
b. Extract the firmware upgrade file.
c. Click Administration > Firmware Upgrade.
d. In the File field, enter the location of the firmware upgrade file or click the
Browse button to locate the file.
e.
Click Upgrade and follow the on-screen instructions
Re-enter all of your custom configuration settings.
Rebooting the Access Point
The Administration > Reboot page allows you to reboot the access point.
.
6
59