Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual page 90

Specifications
WAP4410N Wireless-N Access Point with Power Over Internet
WAP4410N Specifications (Continued)
Rogue AP Detection
QoS
Spec/Modulation
Channels
Internal Antenna
External Antennas
Transmit Power
Antenna Gain in dBi
Receiver Sensitivity
Device Dimensions
Power
Certification
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
New access points detected, which have not been
categorized as known, are logged as rogue access points.
This allows the administrator to control unapproved
devices in the network.
4 queues, 802. 1 p VLAN priority, WMM Wireless priority,
Mapping of 802. 1 p priority to WMM priority to maintain
end-to-end QoS
Radio and Modulation Type: 802. 1 1b/DSSS, 11g/OFDM,
11n/MIMO-OFDM
Operating Channels: 11 North America, 13 Most of Europe
(ETSI and Japan)
None
3 (omni-directional)
Transmit Power at Normal Temp Range for FCC:
11b - 16 dBm@1TX, 19 dBm@2TX, 20.5dbm@3TX;
11g - 13 dBm@1TX, 16 dBm@2TX, 19dbm@3TX
11n - 20 dBm@MCSO~4/8~12, 18dBm@MCS5/13,
14dBm@MCS6/14, 12dBm@MCS7/15
Transmit Power at Normal Temp Range for ETSI:
11b/g/n: 18.5dBm
2
11.n: 300Mbps@ -69dBm, 11.g: 54Mbps@ -73dBm, 11.b:
11Mbps@ -88dBm
6.69X6.69X1.60 inches (170X170X40.7mm)
0.86 lbs. (0.39 kg)
12V 1A DC input, and IEEE802.3af Compliant PoE.
Maximum power draw is 10. 1 Watts.
CC, CE, IC
32°F to 104°F (0°C to 40°C)
-4°F to 158°F (-20°C to 70°C)
10% to 85% Non-Condensing
5% to 90% Non-Condensing
D
81