Cisco WAP4410N - Small Business Wireless-N Access Point Administration Manual page 44

Configuring the WAP4410N Wireless-N Access Point
Wireless
!
CAUTION
STEP 1
STEP 2
STEP 3
WAP4410N Wireless-N Access Point with Power Over Internet
Configuring WPA2-Enterprise Mixed Security
This security mode supports the transition from WPA-Enterprise to WPA2-
Enterprise. You can have client devices that use either WPA-Enterprise or WPA2-
Enterprise. The access point will automatically choose the encryption algorithm
used by each client device.
Use this mode only when a RADIUS server is connected to the access point.
To enable wireless WPA2-Enterprise Mixed security, follow these steps:
Click Wireless > Security.
From the Security Mode drop-down menu, select WPA2-Enterprise Mixed.
To enable wireless isolation within the SSID, click Enabled.
6
35